@article {3044,
	title = {Microbial nanowires with genetically modified peptide ligands to sustainably fabricate electronic sensing devices.},
	journal = {Biosens Bioelectron},
	volume = {226},
	year = {2023},
	month = {2023 Apr 15},
	pages = {115147},
	abstract = {<p>Nanowires have substantial potential as the sensor component in electronic sensing devices. However, surface functionalization of traditional nanowire and nanotube materials with short peptides that increase sensor selectivity and sensitivity requires complex chemistries with toxic reagents. In contrast, microorganisms can assemble pilin monomers into protein nanowires with intrinsic conductivity from renewable feedstocks, yielding an electronic material that is robust and stable in applications, but also biodegradable. Here we report that the sensitivity and selectivity of protein nanowire-based sensors can be modified with a simple plug and play genetic approach in which a short peptide sequence, designed to bind the analyte of interest, is incorporated into the pilin protein that is microbially assembled into nanowires. We employed a scalable Escherichia coli chassis to fabricate protein nanowires that displayed either a peptide previously demonstrated to effectively bind ammonia, or a peptide known to bind acetic acid. Sensors comprised of thin films of the nanowires amended with the ammonia-specific peptide had a ca. 100-fold greater response to ammonia than sensors made with unmodified protein nanowires. Protein nanowires with the peptide that binds acetic acid yielded a 4-fold higher response than nanowires without the peptide. The protein nanowire-based sensors had greater responses than previously reported sensors fabricated with other nanomaterials. The results demonstrate that protein nanowires with enhanced sensor response for analytes of interest can be fabricated with a flexible genetic strategy that sustainably eliminates the energy, environmental, and health concerns associated with other common nanomaterials.</p>},
	keywords = {Acetic Acid, Ammonia, Biosensing Techniques, Electronics, Fimbriae Proteins, Ligands, Nanowires, Peptides},
	issn = {1873-4235},
	doi = {10.1016/j.bios.2023.115147},
	author = {Lekbach, Yassir and Ueki, Toshiyuki and Liu, Xiaomeng and Woodard, Trevor and Yao, Jun and Lovley, Derek R}
}
@article {3130,
	title = {Lactose-inducible system for metabolic engineering of Clostridium ljungdahlii.},
	journal = {Appl Environ Microbiol},
	volume = {80},
	year = {2014},
	month = {2014 Apr},
	pages = {2410-6},
	abstract = {<p>The development of tools for genetic manipulation of Clostridium ljungdahlii has increased its attractiveness as a chassis for autotrophic production of organic commodities and biofuels from syngas and microbial electrosynthesis and established it as a model organism for the study of the basic physiology of acetogenesis. In an attempt to expand the genetic toolbox for C. ljungdahlii, the possibility of adapting a lactose-inducible system for gene expression, previously reported for Clostridium perfringens, was investigated. The plasmid pAH2, originally developed for C. perfringens with a gusA reporter gene, functioned as an effective lactose-inducible system in C. ljungdahlii. Lactose induction of C. ljungdahlii containing pB1, in which the gene for the aldehyde/alcohol dehydrogenase AdhE1 was downstream of the lactose-inducible promoter, increased expression of adhE1 30-fold over the wild-type level, increasing ethanol production 1.5-fold, with a corresponding decrease in acetate production. Lactose-inducible expression of adhE1 in a strain in which adhE1 and the adhE1 homolog adhE2 had been deleted from the chromosome restored ethanol production to levels comparable to those in the wild-type strain. Inducing expression of adhE2 similarly failed to restore ethanol production, suggesting that adhE1 is the homolog responsible for ethanol production. Lactose-inducible expression of the four heterologous genes necessary to convert acetyl coenzyme A (acetyl-CoA) to acetone diverted ca. 60\% of carbon flow to acetone production during growth on fructose, and 25\% of carbon flow went to acetone when carbon monoxide was the electron donor. These studies demonstrate that the lactose-inducible system described here will be useful for redirecting carbon and electron flow for the biosynthesis of products more valuable than acetate. Furthermore, this tool should aid in optimizing microbial electrosynthesis and for basic studies on the physiology of acetogenesis.</p>},
	keywords = {Acetic Acid, Acetone, Acetyl Coenzyme A, Alcohol Dehydrogenase, Carbon, Clostridium, Ethanol, Fructose, Gene Expression, Gene Expression Regulation, Bacterial, Lactose, Metabolic Engineering, Metabolic Flux Analysis, Transcriptional Activation},
	issn = {1098-5336},
	doi = {10.1128/AEM.03666-13},
	author = {Banerjee, Areen and Leang, Ching and Ueki, Toshiyuki and Nevin, Kelly P and Lovley, Derek R}
}
@article {432,
	title = {Metabolic response of Geobacter sulfurreducens towards electron donor/acceptor variation.},
	journal = {Microb Cell Fact},
	volume = {9},
	year = {2010},
	month = {2010},
	pages = {90},
	abstract = {BACKGROUND: Geobacter sulfurreducens is capable of coupling the complete oxidation of organic compounds to iron reduction. The metabolic response of G. sulfurreducens towards variations in electron donors (acetate, hydrogen) and acceptors (Fe(III), fumarate) was investigated via (13)C-based metabolic flux analysis. We examined the (13)C-labeling patterns of proteinogenic amino acids obtained from G. sulfurreducens cultured with (13)C-acetate.

RESULTS: Using (13)C-based metabolic flux analysis, we observed that donor and acceptor variations gave rise to differences in gluconeogenetic initiation, tricarboxylic acid cycle activity, and amino acid biosynthesis pathways. Culturing G. sulfurreducens cells with Fe(III) as the electron acceptor and acetate as the electron donor resulted in pyruvate as the primary carbon source for gluconeogenesis. When fumarate was provided as the electron acceptor and acetate as the electron donor, the flux analysis suggested that fumarate served as both an electron acceptor and, in conjunction with acetate, a carbon source. Growth on fumarate and acetate resulted in the initiation of gluconeogenesis by phosphoenolpyruvate carboxykinase and a slightly elevated flux through the oxidative tricarboxylic acid cycle as compared to growth with Fe(III) as the electron acceptor. In addition, the direction of net flux between acetyl-CoA and pyruvate was reversed during growth on fumarate relative to Fe(III), while growth in the presence of Fe(III) and acetate which provided hydrogen as an electron donor, resulted in decreased flux through the tricarboxylic acid cycle.

CONCLUSIONS: We gained detailed insight into the metabolism of G. sulfurreducens cells under various electron donor/acceptor conditions using (13)C-based metabolic flux analysis. Our results can be used for the development of G. sulfurreducens as a chassis for a variety of applications including bioremediation and renewable biofuel production.},
	keywords = {Acetic Acid, Acetyl Coenzyme A, Amino Acids, Carbon Isotopes, Citric Acid Cycle, Electrons, Ferric Compounds, Fumarates, Geobacter, Gluconeogenesis, Oxidation-Reduction, Phosphoenolpyruvate Carboxykinase (GTP), Pyruvates},
	issn = {1475-2859},
	doi = {10.1186/1475-2859-9-90},
	author = {Yang, Tae Hoon and Coppi, Maddalena V and Lovley, Derek R and Sun, Jun}
}
@article {475,
	title = {Graphite electrode as a sole electron donor for reductive dechlorination of tetrachlorethene by Geobacter lovleyi.},
	journal = {Appl Environ Microbiol},
	volume = {74},
	year = {2008},
	month = {2008 Oct},
	pages = {5943-7},
	abstract = {The possibility that graphite electrodes can serve as the direct electron donor for microbially catalyzed reductive dechlorination was investigated with Geobacter lovleyi. In an initial evaluation of whether G. lovleyi could interact electronically with graphite electrodes, cells were provided with acetate as the electron donor and an electrode as the sole electron acceptor. Current was produced at levels that were ca. 10-fold lower than those previously reported for Geobacter sulfurreducens under similar conditions, and G. lovleyi anode biofilms were correspondingly thinner. When an electrode poised at -300 mV (versus a standard hydrogen electrode) was provided as the electron donor, G. lovleyi effectively reduced fumarate to succinate. The stoichiometry of electrons consumed to succinate produced was 2:1, the ratio expected if the electrode served as the sole electron donor for fumarate reduction. G. lovleyi effectively reduced tetrachloroethene (PCE) to cis-dichloroethene with a poised electrode as the sole electron donor at rates comparable to those obtained when acetate serves as the electron donor. Cells were less abundant on the electrodes when the electrodes served as an electron donor than when they served as an electron acceptor. PCE was not reduced in controls without cells or when the current supply to cells was interrupted. These results demonstrate that G. lovleyi can use a poised electrode as a direct electron donor for reductive dechlorination of PCE. The ability to colocalize dechlorinating microorganisms with electrodes has several potential advantages for bioremediation of subsurface chlorinated contaminants, especially in source zones where electron donor delivery is challenging and often limits dechlorination.},
	keywords = {Acetic Acid, Biofilms, Biomass, Electricity, Electrodes, Electrons, Ethylene Dichlorides, Fumarates, Geobacter, Graphite, Microscopy, Electron, Scanning, Succinic Acid, Tetrachloroethylene},
	issn = {1098-5336},
	doi = {10.1128/AEM.00961-08},
	author = {Strycharz, Sarah M and Woodard, Trevor L and Johnson, Jessica P and Nevin, Kelly P and Sanford, Robert A and L{\"o}ffler, Frank E and Lovley, Derek R}
}
