@article {3044, title = {Microbial nanowires with genetically modified peptide ligands to sustainably fabricate electronic sensing devices.}, journal = {Biosens Bioelectron}, volume = {226}, year = {2023}, month = {2023 Apr 15}, pages = {115147}, abstract = {

Nanowires have substantial potential as the sensor component in electronic sensing devices. However, surface functionalization of traditional nanowire and nanotube materials with short peptides that increase sensor selectivity and sensitivity requires complex chemistries with toxic reagents. In contrast, microorganisms can assemble pilin monomers into protein nanowires with intrinsic conductivity from renewable feedstocks, yielding an electronic material that is robust and stable in applications, but also biodegradable. Here we report that the sensitivity and selectivity of protein nanowire-based sensors can be modified with a simple plug and play genetic approach in which a short peptide sequence, designed to bind the analyte of interest, is incorporated into the pilin protein that is microbially assembled into nanowires. We employed a scalable Escherichia coli chassis to fabricate protein nanowires that displayed either a peptide previously demonstrated to effectively bind ammonia, or a peptide known to bind acetic acid. Sensors comprised of thin films of the nanowires amended with the ammonia-specific peptide had a ca. 100-fold greater response to ammonia than sensors made with unmodified protein nanowires. Protein nanowires with the peptide that binds acetic acid yielded a 4-fold higher response than nanowires without the peptide. The protein nanowire-based sensors had greater responses than previously reported sensors fabricated with other nanomaterials. The results demonstrate that protein nanowires with enhanced sensor response for analytes of interest can be fabricated with a flexible genetic strategy that sustainably eliminates the energy, environmental, and health concerns associated with other common nanomaterials.

}, keywords = {Acetic Acid, Ammonia, Biosensing Techniques, Electronics, Fimbriae Proteins, Ligands, Nanowires, Peptides}, issn = {1873-4235}, doi = {10.1016/j.bios.2023.115147}, author = {Lekbach, Yassir and Ueki, Toshiyuki and Liu, Xiaomeng and Woodard, Trevor and Yao, Jun and Lovley, Derek R} } @article {3053, title = {Microbial nanowires.}, journal = {Curr Biol}, volume = {32}, year = {2022}, month = {2022 Feb 07}, pages = {R110-R112}, abstract = {

In this Quick guide, Derek Lovley introduces microbial nanowires-conductive extracellular appendages made by some bacteria and archaea.

}, keywords = {Bacteria, Electric Conductivity, Electron Transport, Fimbriae, Bacterial, Nanowires}, issn = {1879-0445}, doi = {10.1016/j.cub.2021.12.019}, author = {Lovley, Derek R} } @article {3050, title = {Untangling Geobacter sulfurreducens Nanowires.}, journal = {mBio}, volume = {13}, year = {2022}, month = {2022 Jun 28}, pages = {e0085022}, keywords = {Electron Transport, Fimbriae Proteins, Fimbriae, Bacterial, Geobacter, Nanowires, Oxidation-Reduction}, issn = {2150-7511}, doi = {10.1128/mbio.00850-22}, author = {Lovley, Derek R} } @article {3065, title = {Intrinsically Conductive Microbial Nanowires for {\textquoteright}Green{\textquoteright} Electronics with Novel Functions.}, journal = {Trends Biotechnol}, volume = {39}, year = {2021}, month = {2021 Sep}, pages = {940-952}, abstract = {

Intrinsically conductive protein nanowires, microbially produced from inexpensive, renewable feedstocks, are a sustainable alternative to traditional nanowire electronic materials, which require high energy inputs and hazardous conditions/chemicals for fabrication and can be highly toxic. Pilin-based nanowires can be tailored for specific functions via the design of synthetic pilin genes to tune wire conductivity or introduce novel functionalities. Other microbially produced nanowire options for electronics may include cytochrome wires, curli fibers, and the conductive fibers of cable bacteria. Proof-of-concept protein nanowire electronics that have been successfully demonstrated include biomedical sensors, neuromorphic devices, and a device that generates electricity from ambient humidity. Further development of applications will require interdisciplinary teams of engineers, biophysicists, and synthetic biologists.

}, keywords = {Electric Conductivity, Electronics, Nanowires, Proteins}, issn = {1879-3096}, doi = {10.1016/j.tibtech.2020.12.005}, author = {Lovley, Derek R and Yao, Jun} } @article {3061, title = {Self-sustained green neuromorphic interfaces.}, journal = {Nat Commun}, volume = {12}, year = {2021}, month = {2021 Jun 07}, pages = {3351}, abstract = {

Incorporating neuromorphic electronics in bioelectronic interfaces can provide intelligent responsiveness to environments. However, the signal mismatch between the environmental stimuli and driving amplitude in neuromorphic devices has limited the functional versatility and energy sustainability. Here we demonstrate multifunctional, self-sustained neuromorphic interfaces by achieving signal matching at the biological level. The advances rely on the unique properties of microbially produced protein nanowires, which enable both bio-amplitude (e.g., <100 mV) signal processing and energy harvesting from ambient humidity. Integrating protein nanowire-based sensors, energy devices and memristors of bio-amplitude functions yields flexible, self-powered neuromorphic interfaces that can intelligently interpret biologically relevant stimuli for smart responses. These features, coupled with the fact that protein nanowires are a green biomaterial of potential diverse functionalities, take the interfaces a step closer to biological integration.

}, keywords = {Biocompatible Materials, Electronics, Nanotechnology, Nanowires, Neural Networks, Computer, Proteins, Synapses}, issn = {2041-1723}, doi = {10.1038/s41467-021-23744-2}, author = {Fu, Tianda and Liu, Xiaomeng and Fu, Shuai and Woodard, Trevor and Gao, Hongyan and Lovley, Derek R and Yao, Jun} } @article {3064, title = {Solvent-Induced Assembly of Microbial Protein Nanowires into Superstructured Bundles.}, journal = {Biomacromolecules}, volume = {22}, year = {2021}, month = {2021 Mar 08}, pages = {1305-1311}, abstract = {

Protein-based electronic biomaterials represent an attractive alternative to traditional metallic and semiconductor materials due to their environmentally benign production and purification. However, major challenges hindering further development of these materials include (1) limitations associated with processing proteins in organic solvents and (2) difficulties in forming higher-order structures or scaffolds with multilength scale control. This paper addresses both challenges, resulting in the formation of one-dimensional bundles composed of electrically conductive protein nanowires harvested from the microbes and . Processing these bionanowires from common organic solvents, such as hexane, cyclohexane, and DMF, enabled the production of multilength scale structures composed of distinctly visible pili. Transmission electron microscopy revealed striking images of bundled protein nanowires up to 10 μm in length and with widths ranging from 50-500 nm (representing assembly of tens to hundreds of nanowires). Conductive atomic force microscopy confirmed the presence of an appreciable nanowire conductivity in their bundled state. These results greatly expand the possibilities for fabricating a diverse array of protein nanowire-based electronic device architectures.

}, keywords = {Electric Conductivity, Electron Transport, Geobacter, Nanowires, Solvents}, issn = {1526-4602}, doi = {10.1021/acs.biomac.0c01790}, author = {Sun, Yun-Lu and Montz, Brian J and Selhorst, Ryan and Tang, Hai-Yan and Zhu, Jiaxin and Nevin, Kelly P and Woodard, Trevor L and Ribbe, Alexander E and Russell, Thomas P and Nonnenmann, Stephen S and Lovley, Derek R and Emrick, Todd} } @article {3069, title = {Bioinspired bio-voltage memristors.}, journal = {Nat Commun}, volume = {11}, year = {2020}, month = {2020 Apr 20}, pages = {1861}, abstract = {

Memristive devices are promising candidates to emulate biological computing. However, the typical switching voltages (0.2-2 V) in previously described devices are much higher than the amplitude in biological counterparts. Here we demonstrate a type of diffusive memristor, fabricated from the protein nanowires harvested from the bacterium Geobacter sulfurreducens, that functions at the biological voltages of 40-100 mV. Memristive function at biological voltages is possible because the protein nanowires catalyze metallization. Artificial neurons built from these memristors not only function at biological action potentials (e.g., 100 mV, 1 ms) but also exhibit temporal integration close to that in biological neurons. The potential of using the memristor to directly process biosensing signals is also demonstrated.

}, keywords = {Action Potentials, Biosensing Techniques, Electricity, Electronics, Equipment Design, Geobacter, Humans, Molecular Dynamics Simulation, Nanotechnology, Nanowires, Neural Networks, Computer, Neurons, Synapses, Wearable Electronic Devices}, issn = {2041-1723}, doi = {10.1038/s41467-020-15759-y}, author = {Fu, Tianda and Liu, Xiaomeng and Gao, Hongyan and Ward, Joy E and Liu, Xiaorong and Yin, Bing and Wang, Zhongrui and Zhuo, Ye and Walker, David J F and Joshua Yang, J and Chen, Jianhan and Lovley, Derek R and Yao, Jun} } @article {3070, title = {An Chassis for Production of Electrically Conductive Protein Nanowires.}, journal = {ACS Synth Biol}, volume = {9}, year = {2020}, month = {2020 Mar 20}, pages = {647-654}, abstract = {

pilin-based electrically conductive protein nanowires (e-PNs) are a revolutionary electronic material. They offer novel options for electronic sensing applications and have the remarkable ability to harvest electrical energy from atmospheric humidity. However, technical constraints limit mass cultivation and genetic manipulation of . Therefore, we designed a strain of to express e-PNs by introducing a plasmid that contained an inducible operon with genes for type IV pili biogenesis machinery and a synthetic gene designed to yield a peptide monomer that could be assembled into e-PNs. The e-PNs expressed in and harvested with a simple filtration method had the same diameter (3 nm) and conductance as e-PNs expressed in . These results, coupled with the robustness of for mass cultivation and the extensive toolbox for genetic manipulation, greatly expand the opportunities for large-scale fabrication of novel e-PNs.

}, keywords = {Electric Conductivity, Escherichia coli, Fimbriae Proteins, Fimbriae, Bacterial, Geobacter, Graphite, Microorganisms, Genetically-Modified, Microscopy, Atomic Force, Nanowires, Operon, Protein Engineering}, issn = {2161-5063}, doi = {10.1021/acssynbio.9b00506}, author = {Ueki, Toshiyuki and Walker, David J F and Woodard, Trevor L and Nevin, Kelly P and Nonnenmann, Stephen S and Lovley, Derek R} } @article {3068, title = {Protein Nanowires: the Electrification of the Microbial World and Maybe Our Own.}, journal = {J Bacteriol}, volume = {202}, year = {2020}, month = {2020 Sep 23}, abstract = {

Electrically conductive protein nanowires appear to be widespread in the microbial world and are a revolutionary "green" material for the fabrication of electronic devices. Electrically conductive pili (e-pili) assembled from type IV pilin monomers have independently evolved multiple times in microbial history as have electrically conductive archaella (e-archaella) assembled from homologous archaellin monomers. A role for e-pili in long-range (micrometer) extracellular electron transport has been demonstrated in some microbes. The surprising finding of e-pili in syntrophic bacteria and the role of e-pili as conduits for direct interspecies electron transfer have necessitated a reassessment of routes for electron flux in important methanogenic environments, such as anaerobic digesters and terrestrial wetlands. Pilin monomers similar to those found in e-pili may also be a major building block of the conductive "cables" that transport electrons over centimeter distances through continuous filaments of cable bacteria consisting of a thousand cells or more. Protein nanowires harvested from microbes have many functional and sustainability advantages over traditional nanowire materials and have already yielded novel electronic devices for sustainable electricity production, neuromorphic memory, and sensing. e-pili can be mass produced with an chassis, providing a ready source of material for electronics as well as for studies on the basic mechanisms for long-range electron transport along protein nanowires. Continued exploration is required to better understand the electrification of microbial communities with microbial nanowires and to expand the "green toolbox" of sustainable materials for wiring and powering the emerging "Internet of things."

}, keywords = {Electric Conductivity, Electron Transport, Fimbriae Proteins, Fimbriae, Bacterial, Geobacter, Microscopy, Electron, Nanowires, Protein Engineering}, issn = {1098-5530}, doi = {10.1128/JB.00331-20}, author = {Lovley, Derek R and Holmes, Dawn E} } @article {3076, title = {Cryo-EM reveals the structural basis of long-range electron transport in a cytochrome-based bacterial nanowire.}, journal = {Commun Biol}, volume = {2}, year = {2019}, month = {2019}, pages = {219}, abstract = {

Electrically conductive pili from species, termed bacterial nanowires, are intensely studied for their biological significance and potential in the development of new materials. Using cryo-electron microscopy, we have characterized nanowires from conductive pili preparations that are composed solely of head-to-tail stacked monomers of the six-heme C-type cytochrome OmcS. The unique fold of OmcS - closely wrapped around a continuous stack of hemes that can serve as an uninterrupted path for electron transport - generates a scaffold that supports the unbranched chain of hemes along the central axis of the filament. We present here, at 3.4 {\r A} resolution, the structure of this cytochrome-based filament and discuss its possible role in long-range biological electron transport.

}, keywords = {Cryoelectron Microscopy, Cytochromes c, Electron Transport, Fimbriae, Bacterial, Geobacter, Nanowires}, issn = {2399-3642}, doi = {10.1038/s42003-019-0448-9}, author = {Filman, David J and Marino, Stephen F and Ward, Joy E and Yang, Lu and Mester, Zolt{\'a}n and Bullitt, Esther and Lovley, Derek R and Strauss, Mike} } @article {3075, title = {Decorating the Outer Surface of Microbially Produced Protein Nanowires with Peptides.}, journal = {ACS Synth Biol}, volume = {8}, year = {2019}, month = {2019 Aug 16}, pages = {1809-1817}, abstract = {

The potential applications of electrically conductive protein nanowires (e-PNs) harvested from might be greatly expanded if the outer surface of the wires could be modified to confer novel sensing capabilities or to enhance binding to other materials. We developed a simple strategy for functionalizing e-PNs with surface-exposed peptides. The gene for the monomer that assembles into e-PNs was modified to add peptide tags at the carboxyl terminus of the monomer. Strains of were constructed that fabricated synthetic e-PNs with a six-histidine "His-tag" or both the His-tag and a nine-peptide "HA-tag" exposed on the outer surface. Addition of the peptide tags did not diminish e-PN conductivity. The abundance of HA-tag in e-PNs was controlled by placing expression of the gene for the synthetic monomer with the HA-tag under transcriptional regulation. These studies suggest broad possibilities for tailoring e-PN properties for diverse applications.

}, keywords = {Carboxy-Lyases, Ethylene Glycols, Molecular Structure, Nanowires, Oxygenases, Peptides, Phenylalanine Ammonia-Lyase, Plasmids, Proteins, Saccharomyces cerevisiae, Saccharomyces cerevisiae Proteins, Styrenes}, issn = {2161-5063}, doi = {10.1021/acssynbio.9b00131}, author = {Ueki, Toshiyuki and Walker, David J F and Tremblay, Pier-Luc and Nevin, Kelly P and Ward, Joy E and Woodard, Trevor L and Nonnenmann, Stephen S and Lovley, Derek R} } @article {3081, title = {Conductive Composite Materials Fabricated from Microbially Produced Protein Nanowires.}, journal = {Small}, volume = {14}, year = {2018}, month = {2018 Nov}, pages = {e1802624}, abstract = {

Protein-based electronic materials have numerous potential advantages with respect to sustainability and biocompatibility over electronic materials that are synthesized using harsh chemical processes and/or which contain toxic components. The microorganism Geobacter sulfurreducens synthesizes electrically conductive protein nanowires (e-PNs) with high aspect ratios (3 nm {\texttimes} 10-30 {\textmu}m) from renewable organic feedstocks. Here, the integration of G. Sulfurreducens e-PNs into poly(vinyl alcohol) (PVA) as a host polymer matrix is described. The resultant e-PN/PVA composites exhibit conductivities comparable to PVA-based composites containing synthetic nanowires. The relationship between e-PN density and conductivity of the resultant composites is consistent with percolation theory. These e-PNs confer conductivity to the composites even under extreme conditions, with the highest conductivities achieved from materials prepared at pH 1.5 and temperatures greater than 100 {\textdegree}C. These results demonstrate that e-PNs represent viable and sustainable nanowire compositions for the fabrication of electrically conductive composite materials.

}, keywords = {Geobacter, Nanocomposites, Nanowires, Polymers}, issn = {1613-6829}, doi = {10.1002/smll.201802624}, author = {Sun, Yun-Lu and Tang, Hai-Yan and Ribbe, Alexander and Duzhko, Volodimyr and Woodard, Trevor L and Ward, Joy E and Bai, Ying and Nevin, Kelly P and Nonnenmann, Stephen S and Russell, Thomas and Emrick, Todd and Lovley, Derek R} } @article {3101, title = {Synthetic Biological Protein Nanowires with High Conductivity.}, journal = {Small}, volume = {12}, year = {2016}, month = {2016 Sep}, pages = {4481-5}, abstract = {

Genetic modification to add tryptophan to PilA, the monomer for the electrically conductive pili of Geobacter sulfurreducens, yields conductive protein filaments 2000-fold more conductive than the wild-type pili while cutting the diameter in half to 1.5 nm.

}, keywords = {Amino Acid Sequence, Electric Conductivity, Fimbriae, Bacterial, Geobacter, Nanowires, Proteins, Tryptophan}, issn = {1613-6829}, doi = {10.1002/smll.201601112}, author = {Tan, Yang and Adhikari, Ramesh Y and Malvankar, Nikhil S and Pi, Shuang and Ward, Joy E and Woodard, Trevor L and Nevin, Kelly P and Xia, Qiangfei and Tuominen, Mark T and Lovley, Derek R} } @article {3114, title = {Seeing is believing: novel imaging techniques help clarify microbial nanowire structure and function.}, journal = {Environ Microbiol}, volume = {17}, year = {2015}, month = {2015 Jul}, pages = {2209-15}, abstract = {

Novel imaging approaches have recently helped to clarify the properties of {\textquoteright}microbial nanowires{\textquoteright}. Geobacter sulfurreducens pili are actual wires. They possess metallic-like conductivity, which can be attributed to overlapping pi-pi orbitals of key aromatic amino acids. Electrostatic force microscopy recently confirmed charge propagation along the pili, in a manner similar to carbon nanotubes. The pili are essential for long-range electron transport to insoluble electron acceptors and interspecies electron transfer. Previous claims that Shewanella oneidensis also produce conductive pili have recently been recanted, based on novel live-imaging studies. The putative pili are, in fact, long extensions of the cytochrome-rich outer membrane and periplasm that, when dried, collapse to form filaments with dimensions similar to pili. It has yet to be demonstrated whether the cytochrome-to-cytochrome electron hopping documented in the dried membrane extensions takes place in intact hydrated membrane extensions or whether the membrane extensions enhance electron transport to insoluble electron acceptors such as Fe(III) oxides or electrodes. These findings demonstrate that G. sulfurreducens conductive pili and the outer membrane extensions of S. oneidensis are fundamentally different in composition, mechanism of electron transport and physiological role. New methods for evaluating filament conductivity will facilitate screening the microbial world for nanowires and elucidating their function.

}, keywords = {Cytochromes, Electric Conductivity, Electron Transport, Electrons, Ferric Compounds, Fimbriae, Bacterial, Geobacter, Microscopy, Atomic Force, Nanowires, Oxides, Periplasm, Shewanella}, issn = {1462-2920}, doi = {10.1111/1462-2920.12708}, author = {Lovley, Derek R and Malvankar, Nikhil S} } @article {3111, title = {Structural basis for metallic-like conductivity in microbial nanowires.}, journal = {mBio}, volume = {6}, year = {2015}, month = {2015 Mar 03}, pages = {e00084}, abstract = {

UNLABELLED: Direct measurement of multiple physical properties of Geobacter sulfurreducens pili have demonstrated that they possess metallic-like conductivity, but several studies have suggested that metallic-like conductivity is unlikely based on the structures of the G.~sulfurreducens pilus predicted from homology models. In order to further evaluate this discrepancy, pili were examined with synchrotron X-ray microdiffraction and rocking-curve X-ray diffraction. Both techniques revealed a periodic 3.2-{\r A} spacing in conductive, wild-type G.~sulfurreducens pili that was missing in the nonconductive pili of strain Aro5, which lack key aromatic acids required for conductivity. The intensity of the 3.2-{\r A} peak increased 100-fold when the pH was shifted from 10.5 to 2, corresponding with a previously reported 100-fold increase in pilus conductivity with this pH change. These results suggest a clear structure-function correlation for metallic-like conductivity that can be attributed to overlapping π-orbitals of aromatic amino acids. A homology model of the G.~sulfurreducens pilus was constructed with a Pseudomonas aeruginosa pilus model as a template as an alternative to previous models, which were based on a Neisseria gonorrhoeae pilus structure. This alternative model predicted that aromatic amino acids in G.~sulfurreducens pili are packed within 3 to 4~{\r A}, consistent with the experimental results. Thus, the predictions of homology modeling are highly sensitive to assumptions inherent in the model construction. The experimental results reported here further support the concept that the pili of G.~sulfurreducens represent a novel class of electronically functional proteins in which aromatic amino acids promote long-distance electron transport.

IMPORTANCE: The mechanism for long-range electron transport along the conductive pili of Geobacter sulfurreducens is of interest because these "microbial nanowires" are important in biogeochemical cycling as well as applications in bioenergy and bioelectronics. Although proteins are typically insulators, G.~sulfurreducens pilus proteins possess metallic-like conductivity. The studies reported here provide important structural insights into the mechanism of the metallic-like conductivity of G.~sulfurreducens pili. This information is expected to be useful in the design of novel bioelectronic materials.

}, keywords = {Amino Acids, Aromatic, Chemical Phenomena, Electrophysiological Phenomena, Fimbriae, Bacterial, Geobacter, Hydrogen-Ion Concentration, Models, Molecular, Nanowires, X-Ray Diffraction}, issn = {2150-7511}, doi = {10.1128/mBio.00084-15}, author = {Malvankar, Nikhil S and Vargas, Madeline and Nevin, Kelly and Tremblay, Pier-Luc and Evans-Lutterodt, Kenneth and Nykypanchuk, Dmytro and Martz, Eric and Tuominen, Mark T and Lovley, Derek R} } @article {3123, title = {Microbial nanowires for bioenergy applications.}, journal = {Curr Opin Biotechnol}, volume = {27}, year = {2014}, month = {2014 Jun}, pages = {88-95}, abstract = {

Microbial nanowires are electrically conductive filaments that facilitate long-range extracellular electron transfer. The model for electron transport along Shewanella oneidensis nanowires is electron hopping/tunneling between cytochromes adorning the filaments. Geobacter sulfurreducens nanowires are comprised of pili that have metal-like conductivity attributed to overlapping pi-pi orbitals of aromatic amino acids. The nanowires of Geobacter species have been implicated in direct interspecies electron transfer (DIET), which may be an important mode of syntrophy in the conversion of organic wastes to methane. Nanowire networks confer conductivity to Geobacter biofilms converting organic compounds to electricity in microbial fuel cells (MFCs) and increasing nanowire production is the only genetic manipulation shown to yield strains with improved current-producing capabilities. Introducing nanowires, or nanowire mimetics, might improve other bioenergy strategies that rely on extracellular electron exchange, such as microbial electrosynthesis. Similarities between microbial nanowires and synthetic conducting polymers suggest additional energy-related applications.

}, keywords = {Anaerobiosis, Bioelectric Energy Sources, Biofilms, Electric Conductivity, Electricity, Electron Transport, Electrons, Fimbriae, Bacterial, Geobacter, Methane, Nanowires, Shewanella, Synthetic Biology}, issn = {1879-0429}, doi = {10.1016/j.copbio.2013.12.003}, author = {Malvankar, Nikhil S and Lovley, Derek R} } @article {3139, title = {Improved cathode for high efficient microbial-catalyzed reduction in microbial electrosynthesis cells.}, journal = {Phys Chem Chem Phys}, volume = {15}, year = {2013}, month = {2013 Sep 14}, pages = {14290-4}, abstract = {

Microbial electrosynthesis cells (MECs) are devices wherein microorganisms can electrochemically interact with electrodes, directly donating or accepting electrons from electrode surfaces. Here, we developed a novel cathode by using nickel nanowires anchored to graphite for the improvement of microbial-catalyzed reduction in MEC cathode chamber. This porous nickel-nanowire-network-coated graphite electrode increased the interfacial area and interfacial interactions between the cathode surface and the microbial biofilm. A 2.3 fold increase in bio-reduction rate over the untreated graphite was observed. Around 282 mM day(-1) m(-2) of acetate resulting from the bio-reduction of carbon dioxide by Sporomusa was produced with 82 {\textpm} 14\% of the electrons consumed being recovered in acetate.

}, keywords = {Biocatalysis, Bioelectric Energy Sources, Biofilms, Carbon Dioxide, Electrochemical Techniques, Electrodes, Graphite, Nanowires, Nickel, Oxidation-Reduction, Veillonellaceae}, issn = {1463-9084}, doi = {10.1039/c3cp52697f}, author = {Nie, Huarong and Zhang, Tian and Cui, Mengmeng and Lu, Haiyun and Lovley, Derek R and Russell, Thomas P} } @article {418, title = {Tunable metallic-like conductivity in microbial nanowire networks.}, journal = {Nat Nanotechnol}, volume = {6}, year = {2011}, month = {2011 Sep}, pages = {573-9}, abstract = {Electronic nanostructures made from natural amino acids are attractive because of their relatively low cost, facile processing and absence of toxicity. However, most materials derived from natural amino acids are electronically insulating. Here, we report metallic-like conductivity in films of the bacterium Geobacter sulfurreducens and also in pilin nanofilaments (known as microbial nanowires) extracted from these bacteria. These materials have electronic conductivities of \~{}5~mS~cm(-1), which are comparable to those of synthetic metallic nanostructures. They can also conduct over distances on the centimetre scale, which is thousands of times the size of a bacterium. Moreover, the conductivity of the biofilm can be tuned by regulating gene expression, and also by varying the gate voltage in a transistor configuration. The conductivity of the nanofilaments has a temperature dependence similar to that of a disordered metal, and the conductivity could be increased by processing.}, keywords = {Electric Conductivity, Geobacter, Nanowires, Transistors, Electronic}, issn = {1748-3395}, doi = {10.1038/nnano.2011.119}, author = {Malvankar, Nikhil S and Vargas, Madeline and Nevin, Kelly P and Franks, Ashley E and Leang, Ching and Kim, Byoung-Chan and Inoue, Kengo and Mester, T{\"u}nde and Covalla, Sean F and Johnson, Jessica P and Rotello, Vincent M and Tuominen, Mark T and Lovley, Derek R} } @article {514, title = {Biofilm and nanowire production leads to increased current in Geobacter sulfurreducens fuel cells.}, journal = {Appl Environ Microbiol}, volume = {72}, year = {2006}, month = {2006 Nov}, pages = {7345-8}, abstract = {Geobacter sulfurreducens developed highly structured, multilayer biofilms on the anode surface of a microbial fuel cell converting acetate to electricity. Cells at a distance from the anode remained viable, and there was no decrease in the efficiency of current production as the thickness of the biofilm increased. Genetic studies demonstrated that efficient electron transfer through the biofilm required the presence of electrically conductive pili. These pili may represent an electronic network permeating the biofilm that can promote long-range electrical transfer in an energy-efficient manner, increasing electricity production more than 10-fold.}, keywords = {Acetates, Bioelectric Energy Sources, Biofilms, Electricity, Electrodes, Electron Transport, Fimbriae, Bacterial, Geobacter, Microscopy, Confocal, Mutation, Nanowires}, issn = {0099-2240}, doi = {10.1128/AEM.01444-06}, author = {Reguera, Gemma and Nevin, Kelly P and Nicoll, Julie S and Covalla, Sean F and Woodard, Trevor L and Lovley, Derek R} }