@article {3044, title = {Microbial nanowires with genetically modified peptide ligands to sustainably fabricate electronic sensing devices.}, journal = {Biosens Bioelectron}, volume = {226}, year = {2023}, month = {2023 Apr 15}, pages = {115147}, abstract = {

Nanowires have substantial potential as the sensor component in electronic sensing devices. However, surface functionalization of traditional nanowire and nanotube materials with short peptides that increase sensor selectivity and sensitivity requires complex chemistries with toxic reagents. In contrast, microorganisms can assemble pilin monomers into protein nanowires with intrinsic conductivity from renewable feedstocks, yielding an electronic material that is robust and stable in applications, but also biodegradable. Here we report that the sensitivity and selectivity of protein nanowire-based sensors can be modified with a simple plug and play genetic approach in which a short peptide sequence, designed to bind the analyte of interest, is incorporated into the pilin protein that is microbially assembled into nanowires. We employed a scalable Escherichia coli chassis to fabricate protein nanowires that displayed either a peptide previously demonstrated to effectively bind ammonia, or a peptide known to bind acetic acid. Sensors comprised of thin films of the nanowires amended with the ammonia-specific peptide had a ca. 100-fold greater response to ammonia than sensors made with unmodified protein nanowires. Protein nanowires with the peptide that binds acetic acid yielded a 4-fold higher response than nanowires without the peptide. The protein nanowire-based sensors had greater responses than previously reported sensors fabricated with other nanomaterials. The results demonstrate that protein nanowires with enhanced sensor response for analytes of interest can be fabricated with a flexible genetic strategy that sustainably eliminates the energy, environmental, and health concerns associated with other common nanomaterials.

}, keywords = {Acetic Acid, Ammonia, Biosensing Techniques, Electronics, Fimbriae Proteins, Ligands, Nanowires, Peptides}, issn = {1873-4235}, doi = {10.1016/j.bios.2023.115147}, author = {Lekbach, Yassir and Ueki, Toshiyuki and Liu, Xiaomeng and Woodard, Trevor and Yao, Jun and Lovley, Derek R} } @article {3048, title = {Microbial biofilms for electricity generation from water evaporation and power to wearables.}, journal = {Nat Commun}, volume = {13}, year = {2022}, month = {2022 Jul 28}, pages = {4369}, abstract = {

Employing renewable materials for fabricating clean energy harvesting devices can further improve sustainability. Microorganisms can be mass produced with renewable feedstocks. Here, we demonstrate that it is possible to engineer microbial biofilms as a cohesive, flexible material for long-term continuous electricity production from evaporating water. Single biofilm sheet (~40 {\textmu}m thick) serving as the functional component in an electronic device continuously produces power density (~1 μW/cm) higher than that achieved with thicker engineered materials. The energy output is comparable to that achieved with similar sized biofilms catalyzing current production in microbial fuel cells, without the need for an organic feedstock or maintaining cell viability. The biofilm can be sandwiched between a pair of mesh electrodes for scalable device integration and current production. The devices maintain the energy production in ionic solutions and can be used as skin-patch devices to harvest electricity from sweat and moisture on skin to continuously power wearable devices. Biofilms made from different microbial species show generic current production from water evaporation. These results suggest that we can harness the ubiquity of biofilms in nature as additional sources of biomaterial for evaporation-based electricity generation in diverse aqueous environments.

}, keywords = {Bioelectric Energy Sources, Biofilms, Electricity, Electrodes, Water, Wearable Electronic Devices}, issn = {2041-1723}, doi = {10.1038/s41467-022-32105-6}, author = {Liu, Xiaomeng and Ueki, Toshiyuki and Gao, Hongyan and Woodard, Trevor L and Nevin, Kelly P and Fu, Tianda and Fu, Shuai and Sun, Lu and Lovley, Derek R and Yao, Jun} } @article {3061, title = {Self-sustained green neuromorphic interfaces.}, journal = {Nat Commun}, volume = {12}, year = {2021}, month = {2021 Jun 07}, pages = {3351}, abstract = {

Incorporating neuromorphic electronics in bioelectronic interfaces can provide intelligent responsiveness to environments. However, the signal mismatch between the environmental stimuli and driving amplitude in neuromorphic devices has limited the functional versatility and energy sustainability. Here we demonstrate multifunctional, self-sustained neuromorphic interfaces by achieving signal matching at the biological level. The advances rely on the unique properties of microbially produced protein nanowires, which enable both bio-amplitude (e.g., <100 mV) signal processing and energy harvesting from ambient humidity. Integrating protein nanowire-based sensors, energy devices and memristors of bio-amplitude functions yields flexible, self-powered neuromorphic interfaces that can intelligently interpret biologically relevant stimuli for smart responses. These features, coupled with the fact that protein nanowires are a green biomaterial of potential diverse functionalities, take the interfaces a step closer to biological integration.

}, keywords = {Biocompatible Materials, Electronics, Nanotechnology, Nanowires, Neural Networks, Computer, Proteins, Synapses}, issn = {2041-1723}, doi = {10.1038/s41467-021-23744-2}, author = {Fu, Tianda and Liu, Xiaomeng and Fu, Shuai and Woodard, Trevor and Gao, Hongyan and Lovley, Derek R and Yao, Jun} } @article {3069, title = {Bioinspired bio-voltage memristors.}, journal = {Nat Commun}, volume = {11}, year = {2020}, month = {2020 Apr 20}, pages = {1861}, abstract = {

Memristive devices are promising candidates to emulate biological computing. However, the typical switching voltages (0.2-2 V) in previously described devices are much higher than the amplitude in biological counterparts. Here we demonstrate a type of diffusive memristor, fabricated from the protein nanowires harvested from the bacterium Geobacter sulfurreducens, that functions at the biological voltages of 40-100 mV. Memristive function at biological voltages is possible because the protein nanowires catalyze metallization. Artificial neurons built from these memristors not only function at biological action potentials (e.g., 100 mV, 1 ms) but also exhibit temporal integration close to that in biological neurons. The potential of using the memristor to directly process biosensing signals is also demonstrated.

}, keywords = {Action Potentials, Biosensing Techniques, Electricity, Electronics, Equipment Design, Geobacter, Humans, Molecular Dynamics Simulation, Nanotechnology, Nanowires, Neural Networks, Computer, Neurons, Synapses, Wearable Electronic Devices}, issn = {2041-1723}, doi = {10.1038/s41467-020-15759-y}, author = {Fu, Tianda and Liu, Xiaomeng and Gao, Hongyan and Ward, Joy E and Liu, Xiaorong and Yin, Bing and Wang, Zhongrui and Zhuo, Ye and Walker, David J F and Joshua Yang, J and Chen, Jianhan and Lovley, Derek R and Yao, Jun} } @article {3071, title = {Power generation from ambient humidity using protein nanowires.}, journal = {Nature}, volume = {578}, year = {2020}, month = {2020 Feb}, pages = {550-554}, abstract = {

Harvesting energy from the environment offers the promise of clean power for self-sustained systems. Known technologies-such as solar cells, thermoelectric devices and mechanical generators-have specific environmental requirements that restrict where they can be deployed and limit their potential for continuous energy production. The ubiquity of atmospheric moisture offers an alternative. However, existing moisture-based energy-harvesting technologies can produce only intermittent, brief (shorter than 50 seconds) bursts of power in the ambient environment, owing to the lack of a sustained conversion mechanism. Here we show that thin-film devices made from nanometre-scale protein wires harvested from the microbe Geobacter sulfurreducens can generate continuous electric power in the ambient environment. The devices produce a sustained voltage of around 0.5~volts across a 7-micrometre-thick film, with a current density of around 17 microamperes per square centimetre. We find the driving force behind this energy generation to be a self-maintained moisture gradient that forms within the film when the film is exposed to the humidity that is naturally present in air. Connecting several devices linearly scales up the voltage and current to power electronics. Our results demonstrate the feasibility of a continuous energy-harvesting strategy that is less restricted by location or environmental conditions than other sustainable approaches.

}, issn = {1476-4687}, doi = {10.1038/s41586-020-2010-9}, author = {Liu, Xiaomeng and Gao, Hongyan and Ward, Joy E and Liu, Xiaorong and Yin, Bing and Fu, Tianda and Chen, Jianhan and Lovley, Derek R and Yao, Jun} }